Spray Coating

Is Spray Coating what you need?

Full coating can be achieved on a coil with three thin rows or less coil construction and straight fins.

  • Lightweight
  • Can be used on site
  • Coil can be fully charged
  • Speed of application
  • High level of skill required for good results
  • Limited coil depth
  • Overspray masking needed
  • 50% loss to atmosphere

Spray Coating Process

On arrival all units are thoroughly inspected...

On arrival all units are thoroughly inspected...

before being disassembled for preparation.

before being disassembled for preparation.

They are then cleaned and dried...

They are then cleaned and dried...

before the Bronz-Glow coating can be applied.

before the Bronz-Glow coating can be applied.

The coating is then quality checked...

The coating is then quality checked...

prior to re-assembly, a further inspection and preparation for

prior to re-assembly, a further inspection and preparation for

Do you have any questions?
Contact Us

Quality Control and Order Progression

Each units Bar code is scanned on arrival and the procedure to be performed logged

Each units Bar code is scanned on arrival and the procedure to be performed logged

If there is no bar code one is made to suit  detailing the process to be performed

If there is no bar code one is made to suit detailing the process to be performed

The bar code information is instantly uploaded to our unit log

The bar code information is instantly uploaded to our unit log

This information is then transferred to our production tracking software

This information is then transferred to our production tracking software

The unit details are instantly programmed into the WIP system and completion dates’ are complied

The unit details are instantly programmed into the WIP system and completion dates’ are complied

Automated E-mails’ are sent to the customer at each step to monitor progress

Automated E-mails’ are sent to the customer at each step to monitor progress

Do NOT be fooled!

Do NOT be fooled!

Even with large fin spacing, coverage is not guaranteed. This can be seen in this figure of a coil that had been sent to us for recoating after a poor attempt at spray coating had been completed.

It is not possible to cover 100% geometrically formed fins with the spraying technique, no matter how many rows there are.

With Immersion Coating, no matter how deep the coil, you get total coverage

Do you need a more comprehensive coating method?
View Immersion Coating

If you would like to know more about Spray Coating please call us on +44 1253 890666, email us at info@bronz-glowireland.com

Safe Contractor ISO 9001 ISO 14001 CPD CIBSE Approved Aqua Aero